The two most popular smart EV home chargers in Australia go head to head. We compare solar compatibility, charging speed, price, app features, warranty and installation to help you choose the right one for your home.
Choose Zappi if you have solar panels or a home battery. Its ECO+ mode is the best solar EV charging system on the Australian market, automatically adjusting charging speed to match your surplus solar generation. It also supports three-phase power for faster 22kW charging.
Choose Hypervolt if you want a clean, easy-to-use smart charger at a slightly lower price. The Hypervolt app is more polished and intuitive, and the hardware is sleek and compact. It is the better pick for homes without solar who just want simple, reliable EV charging.
| Feature | myenergi Zappi | Hypervolt Home |
|---|---|---|
| Price (unit only) | $1,400–$1,545 AUD | $1,200–$1,500 AUD |
| Installed price | $1,550–$2,700 AUD | $1,500–$2,200 AUD |
| Max charging speed | 7kW (1-ph) / 22kW (3-ph) | 7kW (1-phase only) |
| Solar integration | ECO+ mode (auto-adjusts to surplus solar) | Solar mode (app-controlled) |
| Three-phase support | Yes (22kW) | No (7kW only) |
| Connector type | Type 2 (tethered or untethered) | Type 2 (tethered 5m cable) |
| App quality | Good (functional, deeper solar controls) | Excellent (polished, intuitive) |
| Dynamic load balancing | Yes (requires harvi sensor) | Yes (built-in) |
| OCPP compatible | Yes | Yes |
| RFID activation | Yes | Yes |
| Weatherproof rating | IP54 | IP55 |
| Warranty | 3 years | 3 years |
| Energy monitoring | Yes (via app + hub) | Yes (via app) |
| Scheduled charging | Yes | Yes |
| Compatible EVs | All Type 2 EVs (Tesla, BYD, MG, Hyundai, Kia, etc.) | All Type 2 EVs (Tesla, BYD, MG, Hyundai, Kia, etc.) |
If you have solar panels on your roof, this is where Zappi pulls ahead. The Zappi's ECO+ mode is the standout feature that makes it the most recommended EV charger for solar homes in Australia.
Here is how it works: ECO+ mode monitors your home's energy consumption in real time and automatically adjusts the charging speed to match your surplus solar generation. When the sun is shining bright and your panels are producing more than your home is using, Zappi ramps up EV charging. When a cloud passes over or you switch on the aircon, it dials back. This means you can effectively charge your EV for free using only solar power that would otherwise be exported to the grid for a few cents per kWh.
Hypervolt also offers a solar charging mode through its app, but it is less sophisticated. You set a threshold for surplus solar and the charger kicks in when that threshold is reached. It works, but it does not dynamically adjust charging speed the way Zappi does.
Zappi wins clearly for solar-powered homes. If you have a 6.6kW or larger solar system, the savings from ECO+ mode can pay back the price difference within the first year.
Both chargers deliver 7kW on a standard single-phase Australian power supply, which adds about 40 to 45km of range per hour to a typical EV. That is enough to fully charge a Tesla Model 3 or BYD Atto 3 overnight.
The key difference is three-phase support. If your home has a three-phase power supply (common in larger or newer Australian homes), the Zappi can deliver up to 22kW, adding roughly 120km of range per hour. Hypervolt Home is single-phase only, capped at 7kW.
For most Australian homes on single-phase power, this difference does not matter. But if you have three-phase power and want the fastest possible home charging, Zappi is the only option of the two.
Hypervolt comes in slightly cheaper, with units typically priced between $1,200 and $1,500 AUD. Zappi units range from $1,400 to $1,545 AUD. The installed price gap can be larger, with Zappi installations sometimes costing more due to the additional harvi sensor needed for load balancing and solar monitoring.
| Cost Component | Zappi | Hypervolt |
|---|---|---|
| Charger unit | $1,400–$1,545 | $1,200–$1,500 |
| harvi sensor (optional) | ~$200 | Not needed (built-in) |
| Typical installation | $150–$1,155 | $300–$700 |
| Total installed | $1,550–$2,700 | $1,500–$2,200 |
Hypervolt is the better value pick if you do not need solar integration or three-phase charging. Zappi's higher price is justified for solar homes where ECO+ mode can save you hundreds of dollars per year on charging costs.
The Hypervolt app is widely regarded as one of the best EV charger apps in Australia. It features a clean, modern interface with easy-to-understand dashboards showing energy usage, charging history and cost estimates. Scheduling is simple, and the app supports remote start/stop and over-the-air firmware updates.
The Zappi uses the myenergi app, which provides deep control over charging modes (FAST, ECO, ECO+), solar surplus monitoring and energy flow visualisation. It is powerful but has a steeper learning curve than Hypervolt's app. The app also integrates with other myenergi products like the eddi (energy diverter) and harvi (sensor) for a complete home energy ecosystem.
Both chargers must be installed by a licensed electrician. In Australia, EV charger installation typically involves connecting the charger to your switchboard via a dedicated circuit breaker. The cost varies depending on:
Most installations in Australia take 2 to 4 hours. Both Zappi and Hypervolt are widely supported by Australian electricians and EV charger installers. You can read our full EV Home Charger Installation Guide for more details.
Both chargers come with a 3-year warranty. myenergi has been manufacturing EV chargers since 2015 and has an established support network in Australia through solar installers and distributors. Hypervolt is a newer brand but has built a strong reputation for responsive customer support and regular firmware updates.
For warranty claims, both companies require professional installation by a licensed electrician. DIY installation voids the warranty on both units.
Zappi is the better choice for solar-powered homes. Its ECO+ mode automatically adjusts charging speed based on surplus solar generation, meaning you can charge your EV entirely from free solar power. Hypervolt also supports solar integration but Zappi's solar features are more mature and widely recommended by Australian solar installers.
The Zappi EV charger typically costs between $1,400 and $1,545 AUD for the unit alone, with installed prices ranging from $1,550 to $2,700 depending on your switchboard and installation complexity.
The Hypervolt Home EV charger typically costs between $1,200 and $1,500 AUD for the unit, with installed prices generally ranging from $1,500 to $2,200 depending on installation requirements.
Yes, both Zappi and Hypervolt use the Type 2 connector, which is the standard AC charging connector for all electric vehicles sold in Australia, including Tesla Model 3 and Model Y, BYD Atto 3, MG4, Hyundai Ioniq 5, Kia EV6 and all other EVs on the Australian market.
Zappi supports both single-phase (7kW) and three-phase (22kW) power supplies. Hypervolt Home is primarily a single-phase (7kW) charger. If you have three-phase power and want faster charging, Zappi is the better option.
Both apps offer scheduling, energy monitoring and remote control. Hypervolt's app is generally considered more polished and user-friendly with a cleaner interface. Zappi's myenergi app is functional and offers deeper solar integration features but has a steeper learning curve.
Affiliate Disclosure: ChargeWiseHub participates in the Amazon Associates and eBay Partner Network programs. Links in this article may earn us a commission at no extra cost to you. We only recommend products we believe provide genuine value. Read our full affiliate disclosure.
Prices are indicative as of September 2026 and may change. Always verify current pricing before purchase.